High Perfermance Single Port UHF RFID Reader Module With Impinj R2000 Chip
Product Description
M2210 UHF RFID module is a high-performance reader/writer designed by Sanray Technology for high challenging RFID application environment. It employs the newest R2000 RF chip providing the customers unprecedented performance of reading and writing experience.
The modules have been tested for non-stop running, and results showed that our module can work ceaselessly for 180 days. The stability and reliability can perfectly meet our customers’ application requirements.
The maximum power output of this module is +30dBm, with 8dbi antenna, which can realize a efficient reading/writing distance of 10m or above, and over 400tags/s for tags identification. Meanwhile, the compact design makes this module smaller (56.5*36.0*7.8 MM), coupled with the low working voltage of 3.7V--5V, the module is particularly suitable for application in a device such as a handset.
This product is suitable for RFID intensive and more challenging environment and required a higher reading/writing performance, such as warehousing, logistics, production line management, etc..
Product Advantages:
- Employed IMPINJ R2000 RF Chips, up to 110dbm receiving sensitivity and the high performance makes this module more suitable for harsh application environment.
- High stability and reliability, 60*24 hours high temperature of workstation, can work stably and continuous.
- Remarkable performance with 8dbi RF antenna, can achieve a reading distance over 10m per single tag.
- Remarkable performance in intensive taps reading can attain a taps identification rate of 400tags/s.
- Provide the most comprehensive functions SDK and ports, easy to integrate RFID software.
- Adopted integrating RF chip, module performance is more stable, and more suitable for harsh application environment.
- The use of carrier wave cancellation technology makes the tag reading more accurate and the reading scope wider.
- The smallest module volume (56.5*36.0*7.8 MM) in the same field and supply power of 3.7V--5V, it is especially suitable for handsets and other mobile devices.
- Enhance noise suppression for reliable data capture.
- High precision return signal strength (RSSI).
Product Electrical Parameters:
| NO. | Name | Parameters |
| 1 | Dimension | 56.5*36.0*7.8 MM |
| 2 | RF IC | Impinj R2000 |
| 3 | Working Voltage | DC 3.7- 5 V |
| 4 | Working Current | 1.5 A |
| 5 | Standby Current | ≤50mA |
| 6 | Sleep Current | ≤1mA |
| 7 | Working Temperature | -25～+65℃ |
| 8 | Working Humidity | ≤95%(+25℃) |
| 9 | Storage Temperature | -40～+80℃ |
| 10 | Tag Protocol | EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C |
| 11 | Working Frequency | 840～960 MHz |
| 12 | Supporting Working Areas | China 1,China 2;US, Canada and other regions following U.S. FCC;Europe and other regions following ETSI EN 302;208 with & without LBT ;Malaysia,Taiwan;regulations Japan,Korea, |
| 13 | Output Power | Software adjustable, step interval 1.0dB, maximum 30dBm |
| 14 | Output Power Flatness | ±0.2dBm |
| 15 | Receiving Sensitivity | -82dBm |
| 16 | RF Port Standing Wave | ≤1.5 |
| 17 | Reading Distance | ≥10m(With 8dBi antenna/Relate to tags type, transmitted power and application environment) |
| 18 | Multi-tag Reading Amount | ≥400 tags/s |
| 19 | Antenna Interface | one(MMCX) |
| 20 | Interface Communication Rate | 115200bps |
| 21 | Working Temprature Detection | support |
| 22 | Intensive Read/Write Mode DRM | support |
| 23 | Antenna Connection Protection | support |
| 24 | RSSI | support |
| 25 | LED | Red light (power indicator ) |
| 26 | Product Cooling Way | Aluminum metal case as cooling fin for the module |
Interface Definition
| Pin NO. | Name | Type | Description |
| 1 | UART_TX | I/O | TTL UART Transmit |
| 2 | UART_RX | I/O | TTL UART Receive |
| 3 | GPIO3 | I/O | Output |
| 4 | GPIO2 | I/O | Output |
| 5 | GPIO1 | I/O | Output |
| 6 | PWREN_MODULE | I/O | When Pull Down This Pin to Ground,The Module Enter Sleeping Mode. |
| 7 | GND | Ground | Ground |
| 8 | GND | Ground | Ground |
| 9 | VCC | Power | DC 3.7V to 5V Power Input. |
4. Who we(Sanray) are?
Shenzhen Sanray Technology Co., Ltd. is a high-tech enterprise specializing in the development, manufacture and sales of top-quality UHF RFID products and active RFID products. We focus on the development and sales of UHF RFID modules, readers and tags, and 2.45GHz RFID readers, tags, etc. We spare no efforts on the supply of RFID products with various functions and high reliability to our cooperation partners. Also we provide the clients in fields of libraries, financial units, mass production and logistics with comprehensive intelligentized solutions.
5. How to order
Please chat with us through TradeManager or click "contact supplier" to leave massage about the quantity,special modelyou want or your requirement. Then we will reply to you ASAP.
After we confirm all detailed information, we Will Make PI (Performa Invoice) for you to confirm the order if you need.
6. Payment terms
- We accept PayPal, Western Union and Bank transfer.
- 30% deposit and 70% before shipping.
- No payment collection. We only can deliver goods after getting full payment.
7. Contact Ways
E-mail: kayson@sanray.cn
Whatsapp: +86 1588 9770 871
Skype: kension.lee
Product Tags:
|
|
High Perfermance Single Port UHF RFID Reader Module With Impinj R2000 Chip Images
|
