One Port With Impinj Chip UHF RFID Reader Module With Power Indicator
Product Description
M2215 UHF RFID module is a high-performance reader/writer designed by Sanray Technology for high challenging RFID application environment. It employs the newest R500 RF chip providing the customers unprecedented performance of reading and writing experience.
The modules have been tested for non-stop running, and results showed that our module can work ceaselessly for 180 days. The stability and reliability can perfectly meet our customers’ application requirements.
The maximum power output of this module is +30dBm, with 8dbi antenna, which can realize an efficient reading/writing distance of 7m or above. Meanwhile, the compact design makes this module smaller (56.5*36.0*7.8 MM), coupled with the low working voltage of 3.7V--5V, the module is particularly suitable for application in a device such as a handset.
This product is suitable for RFID intensive and more challenging environment and required a higher reading/writing performance, such as warehousing, logistics, production line management, etc..
Product Advantages:
1. Employed IMPINJ R500 RF Chips, high cost effectiveness and good performance.
2. Remarkable performance with 8dbi RF antenna, can achieve a reading distance over 7m per single tag.
3. Remarkable performance in intensive taps reading.
4. Provide the most comprehensive functions SDK and ports, easy to integrate RFID software.
5. Adopted integrating RF chip, module performance is stable and suitable for basic application environment.
6. The use of carrier wave cancellation technology makes the tag reading more accurate and the reading scope wider.
7. The smallest module volume (56.5*36.0*7.8 MM) in the same field and supply power of 3.7V--5V, it is especially suitable for handsets and other mobile devices.
8. High precision return signal strength (RSSI).
Product Electrical Parameters
| NO. | Name | Parameters |
| 1 | Working Voltage | DC 3.7～5V |
| 2 | Working Current | 1.5A |
| 3 | Standby Current | ≤35mA |
| 4 | Sleep Current | ≤1mA |
| 5 | Working Temperature | -25～+65℃ |
| 6 | Working Humidity | ≤95%(+25℃) |
| 7 | Storage Temperature | -40～+80℃ |
| 8 | Tag Protocol | EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C |
| 9 | Working Frequency | 840～960 MHz |
| 10 | Supporting Working Areas | China 1,China 2 US, Canada and other regions following U.S. FCC Europe and other regions following ETSI EN 302 208 with & without LBT regulations Japan,Korea, Malaysia,Taiwan |
| 11 | RF IC | Impinj R500 |
| 12 | Output Power | Software adjustable, step interval 1.0dB, maximum 30dBm |
| 13 | Output Power Flatness | ±0.2dBm |
| 14 | Receiving Sensitivity | -68dBm |
| 15 | RF Port Standing Wave | ≤1.5 |
| 16 | Reading Distance | ≥7m(With 8dBi antenna/Relate to tags type, transmitted power and application environment) |
| 17 | Antenna Interface Amount | one(MMCX) |
| 18 | Interface Communication Rate | 115200bps |
| 19 | Working Temprature Detection | support |
| 20 | Intensive Read/Write Mode DRM | support |
| 21 | Antenna Connection Protection | support |
| 22 | RSSI | support |
| 23 | Product Cooling Way | Aluminum metal case as cooling fin for the module |
| 24 | Dimension | 56.5*36.0*7.8 MM |
Interface Definition
| Pin NO. | Name | Type | Description |
| 1 | UART_TX | I/O | TTL UART Transmit |
| 2 | UART_RX | I/O | TTL UART Receive |
| 3 | GPIO3 | I/O | Output |
| 4 | GPIO2 | I/O | Output |
| 5 | GPIO1 | I/O | Output |
| 6 | PWREN_MODULE | I/O | When Pull Down This Pin to Ground, The Module Enter Sleeping Mode. |
| 7 | GND | Ground | Ground |
| 8 |
| 9 | VCC | Power | DC 3.7V to 5V Power Input. |
| 10 |
Application
Access Control and Time Attendance
Automatic Vehicle ID and Access Control
Warehousing rfid management
Asset Management
Container tracking and Logistics
Personal Identification and tracking
Industrial production process control system.
inventory and storage management
Industrial Automation
Waste management
Animal Identification Pets, Live Stock
Food Logistics and ID
UHF RFID IN Health care
Mining and fuel Auto-ID
Public transport
Retail
Product counterfeit inspection
Clothes
More products to choose:
We also have different kinds of UHF RFID devices, such as uhf rfid reader modules, fixed passtive uhf rfid readers, uhf rfid handheld readers,uhf rfid antennas, Alien inlays, uhf rfid anti metal tags.2.4G active readers and tags, etc.. All devices will come with free SDK and demo (rfid development kit). If anything meet your demand,Pls feel free to contact us for datasheet, catalogue or price. Hope we can be of assistance and provide you our best products and solutions.
Product Tags:
|
|
Contactless One Port With Impinj Chip UHF RFID Reader Module With Power Indicator Images
|
